Telecommunication

Definition

Telecommunications, also called telecommunication, is the exchange of information over significant distances by electronic means. A complete, single telecommunications circuit consists of two stations, each equipped with a transmitter and a receiver. The transmitter and receiver at any station may be combined into a single device called a transceiver. The medium of signal transmission can be electrical wire or cable (also known as "copper"), optical fiber or electromagnetic fields. The free-space transmission and reception of data by means of electromagntetic fields is called wireless.

The simplest form of telecommunications takes place between two stations. However, it is common for multiple transmitting and receiving stations to exchange data among themselves. Such an arrangement is called a telecommunications network. The Internet is the largest example. On a smaller scale, examples include:

• Corporate and academic wide-area networks (WANs)
• Telephone networks
• Police and fire communications systems
• Taxicab dispatch networks
• Groups of amateur radio operators

Data is conveyed in a telecommunications circuit by means of an electrical signal called the carrier or carrier wave. In order for a carrier to convey information, some form of modulation is required. The mode of modulation can be broadly categorized as either analog or digital. In analog modulation, some aspect of the carrier is varied in a continuous fashion. The oldest form of analog modulation is amplitude modulation (AM), still used in radio broadcasting at some frequencies. Digital modulation actually predates analog modulation; the earliest form was Morse code. During the 1900s, dozens of new forms of modulation were developed and deployed, particularly during the so-called "digital revolution" when the use of computers among ordinary citizens became widespread.

In some contexts, a broadcast network, consisting of a single transmitting station and multiple receive-only stations, is considered a form of telecommunications. Radio and television broadcasting are the most common examples.

Telecommunications and broadcasting worldwide are overseen by the International Telecommunication Union (ITU), an agency of the United Nations (UN) with headquarters in Geneva, Switzerland. Most countries have their own agencies that enforce telecommunications regulations formulated by their governments. In the United States, that agency is the Federal Communications Commission (FCC).

Early telecommunications

A replica of one of Chappe's semaphore towers

In the Middle Ages, chains of beacons were commonly used on hilltops as a means of relaying a signal. Beacon chains suffered the drawback that they could only pass a single bit of information, so the meaning of the message such as "the enemy has been sighted" had to be agreed upon in advance. One notable instance of their use was during the Spanish Armada, when a beacon chain relayed a signal from Plymouth to London signalling the arrival of Spanish ships.

In 1792, Claude Chappe, a French engineer, built the first fixed visual telegraphy system (or semaphore line) between Lille and Paris. However semaphore suffered from the need for skilled operators and expensive towers at intervals of ten to thirty kilometres (six to nineteen miles). As a result of competition from the electrical telegraph, the last commercial line was abandoned in 1880.

Computer networks and the Internet

On 11 September 1940, George Stibitz was able to transmit problems using teletype to his Complex Number Calculator in New York and receive the computed results back at Dartmouth College in New Hampshire.[15] This configuration of a centralized computer or mainframe with remote dumb terminals remained popular throughout the 1950s. However, it was not until the 1960s that researchers started to investigate packet switching — a technology that would allow chunks of data to be sent to different computers without first passing through a centralized mainframe. A four-node network emerged on 5 December 1969; this network would become ARPANET, which by 1981 would consist of 213 nodes.

ARPANET's development centred around the Request for Comment process and on 7 April 1969, RFC 1 was published. This process is important because ARPANET would eventually merge with other networks to form the Internet and many of the protocols the Internet relies upon today were specified through the Request for Comment process. In September 1981, RFC 791 introduced the Internet Protocol v4 (IPv4) and RFC 793 introduced the Transmission Control Protocol (TCP) — thus creating the TCP/IP protocol that much of the Internet relies upon today.

However, not all important developments were made through the Request for Comment process. Two popular link protocols for local area networks (LANs) also appeared in the 1970s. A patent for the token ring protocol was filed by Olof Soderblom on 29 October 1974 and a paper on the Ethernet protocol was published by Robert Metcalfe and David Boggs in the July 1976 issue of Communications of the ACM.

Key concepts

A number of key concepts reoccur throughout the literature on modern telecommunication systems. Some of these concepts are discussed below.

Basic elements

A basic telecommunication system consists of three elements:

• a transmitter that takes information and converts it to a signal;
• a transmission medium that carries the signal; and,
• a receiver that receives the signal and converts it back into usable information.

For example, in a radio broadcast the broadcast tower is the transmitter, free space is the transmission medium and the radio is the receiver. Often telecommunication systems are two-way with a single device acting as both a transmitter and receiver or transceiver. For example, a mobile phone is a transceiver.

Telecommunication over a telephone line is called point-to-point communication because it is between one transmitter and one receiver. Telecommunication through radio broadcasts is called broadcast communication because it is between one powerful transmitter and numerous receivers.

Analogue or digital

Signals can be either analogue or digital. In an analogue signal, the signal is varied continuously with respect to the information. In a digital signal, the information is encoded as a set of discrete values (for example ones and zeros). During transmission the information contained in analogue signals will be degraded by noise. Conversely, unless the noise exceeds a certain threshold, the information contained in digital signals will remain intact. Noise resistance represents a key advantage of digital signals over analogue signals.

Networks

A network is a collection of transmitters, receivers and transceivers that communicate with each other. Digital networks consist of one or morerouters that work together to transmit information to the correct user. An analogue network consists of one or more switches that establish a connection between two or more users. For both types of network, repeaters may be necessary to amplify or recreate the signal when it is being transmitted over long distances. This is to combat attenuation that can render the signal indistinguishable from noise.

Channels

A channel is a division in a transmission medium so that it can be used to send multiple streams of information. For example, a radio station may broadcast at 96.1 MHz while another radio station may broadcast at 94.5 MHz. In this case, the medium has been divided by frequency and each channel has received a separate frequency to broadcast on. Alternatively, one could allocate each channel a recurring segment of time over which to broadcast—this is known as time-division multiplexing and is sometimes used in digital communication.

Modulation

The shaping of a signal to convey information is known as modulation. Modulation can be used to represent a digital message as an analogue waveform. This is known as keying and several keying techniques exist (these include phase-shift keying, frequency-shift keying and amplitude-shift keying). Bluetooth, for example, uses phase-shift keying to exchange information between devices.

Modulation can also be used to transmit the information of analogue signals at higher frequencies. This is helpful because low-frequency analogue signals cannot be effectively transmitted over free space. Hence the information from a low-frequency analogue signal must be superimposed on a higher-frequency signal (known as the carrier wave) before transmission. There are several different modulation schemes available to achieve this (two of the most basic being amplitude modulation and frequency modulation). An example of this process is a DJ's voice being superimposed on a 96 MHz carrier wave using frequency modulation (the voice would then be received on a radio as the channel “96 FM”).